RE: Tolerance in text

Subject: RE: Tolerance in text
From: "Jonathan West" <jwest -at- mvps -dot- org>
To: "TECHWR-L" <techwr-l -at- lists -dot- techwr-l -dot- com>
Date: Tue, 21 Feb 2006 16:09:16 -0000


>
> 25 ± 0.1 means 24.9 to 25.1 is acceptable. From everything I was taught,
> the measuring tool used should be accurate to one more decimal place than
> the tolerance. So, a micrometer that measures in ten thousandths is good
> for measuring any part requiring tolerances in the thousandths. I'd have
> to delve back into other text books for the exact allowances.
>
> So, in the preceding example 25.11 is too large and 24.89 is too small.

No. In that example, (assuming the measuring device has a measurement
uncertainty of 0.01) the acceptable range of *measured* values is 24.91 to
25.09. Only within that range can you be sure that the measured value
combined with the maximum measurement uncertainty means that the *actual*
value is within the required range of 24.9 to 25.1.



Regards
Jonathan West

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

WebWorks ePublisher Pro for Word features support for every major Help
format plus PDF, HTML and more. Flexible, precise, and efficient content
delivery. Try it today!. http://www.webworks.com/techwr-l

Doc-To-Help includes a one-click RoboHelp project converter. It's that easy. Watch the demo at http://www.componentone.com/TECHWRL/DocToHelp2005

---
You are currently subscribed to TECHWR-L as archive -at- infoinfocus -dot- com -dot-

To unsubscribe send a blank email to
techwr-l-unsubscribe -at- lists -dot- techwr-l -dot- com
or visit http://lists.techwr-l.com/mailman/options/techwr-l/archive%40infoinfocus.com

To subscribe, send a blank email to techwr-l-join -at- lists -dot- techwr-l -dot- com

Send administrative questions to lisa -at- techwr-l -dot- com -dot- Visit
http://www.techwr-l.com/techwhirl/ for more resources and info.


Follow-Ups:

References:
RE: Tolerance in text: From: eric . dunn

Previous by Author: RE: Tolerance in text
Next by Author: RE: Tolerance in text
Previous by Thread: RE: Tolerance in text
Next by Thread: RE: Tolerance in text


What this post helpful? Share it with friends and colleagues:


Sponsored Ads